
Specifications
Product P/N: 86275
Category
: SensorsSensor Category
: EGT / TITType
: K - Red and YellowSensor Mount
: Clamp, 3 1/4" MaxResistance
: .80 ± .10 ΩWeight
: 0.12Sensor Lead Length
: 13.8"Grounded or Ungrounded?
: GroundedSensor Stagger
: Reverse
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Lead wires are 13.8″ in length and configured in reverse stagger (long red and short yellow)
- Provides sufficient electrical power for Alcor unamplified instruments
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Clamp fits 1 1/8″ to 3 1/4″ diameter exhaust systems with approximately .1285″ size hole
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86275 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.
Replaces Part Numbers:
481-373 | 86165 | 86167 | 86236 | 980110-505 |
M-111 | M111 | MCI-A106-A36 | MCI-A106-A44 |