CHT Type K Thermocouple, Bayonet (3/8-24)

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Intended for use with Type K CHT instruments and leads
  • Not stand alone FAA approved (contact Alcor for FAA approved installations)
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • If using bulk wire for installation, hardware kit P/N 38091 will need to be purchased separately. P/N38091 includes 1ea 632 captive nut, #6 screw, #8 terminal, #6 terminal, #6 lock washer and 4ea #4 terminal.

EGT/TIT Type K Thermocouple, 1/4″ NPT Screw-In

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth to enable a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86143 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, Clamp 3-1/4″ Max, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Clamp fits 1 1/8″ to 3 1/4″ diameter exhaust systems with approximately .1285″ size hole
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86343 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 1/8″ NPT Screw-In, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth enables a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86341 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, Clamp 2.35″ Max, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Clamp fits up to 2.35″ diameter exhaust systems with approximately .1285″ size hole
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86310 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, Long Lead 7/16″- 20 Screw-In, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86309 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 7/16″- 20 Screw-In, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth enables a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86308 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 1/4″ NPT Screw-In, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth enables a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86307 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, Clamp 3-1/4″ Max

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Clamp fits 1 1/8″ to 3 1/4″ diameter exhaust systems with approximately .1285″ size hole
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

 

With Alcor’s blanket STC, p/n 86281 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.Don’t see your part number? No problem!

EGT/TIT Type K Thermocouple, 13.8″ Lead, Clamp 3-1/4″ Max Reverse Stagger

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Lead wires are 13.8″ in length and configured in reverse stagger (long red and short yellow)
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Clamp fits 1 1/8″ to 3 1/4″ diameter exhaust systems with approximately .1285″ size hole
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86275 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.