- Ungrounded probe designed to reduce electrical “noise” in digital indicators
- Small element diameter provides for near instantaneous instrument response
- Intended for use with Type K EGT or TIT instruments and leads
- Adjustable insertion depth enables a perfect fit
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86341 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Ungrounded probe designed to reduce electrical “noise” in digital indicators
- Small element diameter provides for near instantaneous instrument response
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86309 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Ungrounded probe designed to reduce electrical “noise” in digital indicators
- Small element diameter provides for near instantaneous instrument response
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Adjustable insertion depth enables a perfect fit
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86308 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Ungrounded probe designed to reduce electrical “noise” in digital indicators
- Small element diameter provides for near instantaneous instrument response
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Adjustable insertion depth enables a perfect fit
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86307 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Lead wires are configured in reverse stagger(long red and short yellow)
- Built in radiator minimizes the high temperature effects on internal spot weld connections
- Provides sufficient electrical power for Alcor unamplified instruments
- Intended for use with Type K EGT or TIT instruments and leads
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86245 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Provides sufficient electrical power for Alcor unamplified instruments
- Designed with an adjustable insertion depth and a 90 degree bend to enable a perfect fit
- Intended for use with Type K EGT or TIT instruments and leads
- Lead wires are configured in reverse stagger(long red and short yellow)
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86161 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Provides sufficient electrical power for Alcor unamplified instruments
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Lead wires are configured in reverse stagger(long red and short yellow)
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86160 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Provides sufficient electrical power for Alcor unamplified instruments
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type K EGT or TIT instruments and leads
- Lead wires are configured in reverse stagger(long red and short yellow)
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
- Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86159 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.
No Longer Available
- Backed by an industry leading 5-year warranty
- Small element diameter provides for near instantaneous instrument response
- Provides sufficient electrical power for Alcor unamplified instruments
- Built in radiator minimizes the high temperature effects on internal spotweld connections
- Intended for use with Type E EGT or TIT instruments and leads
- Adjustable insertion depth enables a perfect fit
- Accurate to ± 25 degrees at 1500 degrees Fahrenheit
- PMA and FAA approved for all reciprocating powered aircraft
- Alcor probes are designed, manufactured, and supported in the U.S.A.
Don’t see your part number? No problem!
With Alcor’s blanket STC, p/n 86153 can replace many existing Screw-in Type E EGT/TIT probes, including old or obsolete part numbers.