Blog Archives

CHT Type K Thermocouple, Bayonet (3/8-24)

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Intended for use with Type K CHT instruments and leads
  • Not stand alone FAA approved (contact Alcor for FAA approved installations)
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • If using bulk wire for installation, hardware kit P/N 38091 will need to be purchased separately. P/N38091 includes 1ea 632 captive nut, #6 screw, #8 terminal, #6 terminal, #6 lock washer and 4ea #4 terminal.

CHT Type K Thermocouple, Bayonet Reverse Stagger

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Lead wires are configured in reverse stagger(long red and short yellow)
  • Intended for use with Type K CHT instruments and leads, typically found in digital systems.
  • Most engine cylinders require use of Bayonet adaptor, part number 28202 for a secure fit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

CHT Type J Thermocouple, Bayonet

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Intended for use with Type J CHT instruments and leads
  • Most engine cylinders require use of Bayonet adaptor, part number 28202, for a secure fit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

AA86146

BAYONET, RTD Copper. Overall length approx. 15″

CHT Bayonet Adapter (3/8-24)

ADAPTER FOR BAYONET PROBE, INTENDED FOR USE WITH CHT PROBES 86251, 86252 AS WELL AS THE ALCAL 2000+ HEATER 35311.  THIS PRODUCT IS FAA/PMA APPROVED UNDER STC SA522SW.

If using bulk wire for installation, hardware kit P/N 38091 will need to be purchased separately. P/N38091 includes 1ea 632 captive nut, #6 screw, #8 terminal, #6 terminal, #6 lock washer and 4ea #4 terminal.