EGT/TIT Type K Thermocouple, 1/4″ NPT Screw-In

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth to enable a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86143 can replace many existing Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 1/4″ NPT Screw-In, Ungrounded

  • Ungrounded probe designed to reduce electrical “noise” in digital indicators
  • Small element diameter provides for near instantaneous instrument response
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Adjustable insertion depth enables a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86307 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 90° Bend, 1/4″ NPT Screw-In Reverse Stagger

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Designed with an adjustable insertion depth and a 90 degree bend to enable a perfect fit
  • Intended for use with Type K EGT or TIT instruments and leads
  • Lead wires are configured in reverse stagger(long red and short yellow)
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86161 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 1/4″ NPT Screw-In Reverse Stagger

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type K EGT or TIT instruments and leads
  • Lead wires are configured in reverse stagger(long red and short yellow)
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86159 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type E Thermocouple, 1/4″ NPT Screw-In

No Longer Available

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Built in radiator minimizes the high temperature effects on internal spotweld connections
  • Intended for use with Type E EGT or TIT instruments and leads
  • Adjustable insertion depth enables a perfect fit
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86153 can replace many existing Screw-in Type E EGT/TIT probes, including old or obsolete part numbers.

EGT/TIT Type K Thermocouple, 8° Bend, 1/4″ NPT Screw-In

  • Backed by an industry leading 5-year warranty
  • Small element diameter provides for near instantaneous instrument response
  • Provides sufficient electrical power for Alcor unamplified instruments
  • Designed with an adjustable insertion depth and an 8 degree bend to enable a perfect fit
  • Intended for use with Type K EGT or TIT instruments and leads
  • Accurate to ± 25 degrees at 1500 degrees Fahrenheit
  • PMA and FAA approved for all reciprocating powered aircraft
  • Alcor probes are designed, manufactured, and supported in the U.S.A.
  • Includes hardware kit P/N 38094 (4 ea. washer, nut and screws)

Don’t see your part number? No problem!

With Alcor’s blanket STC, p/n 86230 can replace many existing Screw-in Type K EGT/TIT probes, including old or obsolete part numbers.